Tags:
You might check with our Customer Service department to see if any are available. You can reach them at 800-447-8638 or online here.
KregRep
Joey Harris;
One of the many Kreg Jigs I own is the K200 it is complete if you still need I could measure the 1/2 inch riser block so you can see if you can make one it is tapered on the sides like a dovetail. It sounds like you are a machinist so if you are I will send you the measurements in thousands of an inch.
Let me Know Jeff
Sorry Joey;
I meant the K2000 I believe it is the pro pack.
Jeff
Jesse;
I think I measured the wrong one for you I did the 1/2 inch it looks like you wanted the 1 and 1/2 inch let me know and I will re do sorry it has ta\ken this long been tied up need to get it out of storage. The pictures with measurements are listed as a project.
Jeff
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service