A birthday gift for my mother-in-law. Red oak planed down to 7/8" thick with 1" wide pieces of sapele mahogany in the middle of each panel. Band-sawn legs, aprons and stretcher. Legs are joined to the top with through-mortises and tenons. Aprons and stretcher are joined with 3/8" pocket holes and 1-1/4" fine-thread Kreg screws. Project was sanded to 220 (400 on the end grain), wet-sanded with 400-grit paper and tung oil (600 on the end grain), then given multiple coats of my BLO, tung oil, Arm-R-Seal, and mineral spirits blend.
Comment
Sure would russ ha.
Thanks, guys! That's awesome Mike -- that would have been a picture to hang on the wall!
Really Nice
Nice job on the bench russ ,particularly like the mahogany band .Once made a pair of medieval stocks for my mother in law but she would not get in them ha ,go steady.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community