This is a large mirror I built for my daughter. It is a copy of one she wanted from Ikea. This is my first project using the Kreg K4 jig. It is 36" x 73". The boards are right at 7" wide
Comment
Mary, It is really a simple build, cut the 45's on each end, route a rabbit for the mirror and assemble with the glue and the K4 jig and screws. The problem I ran into, was 1) I bought cheap lumber which meant it was not straight or true. and 2) turns out my miter saw does not cut super accurate 45 degree cuts. These issues caused the difficulty level to go up quite a bit :). So if you have straight wood and accurate 45's it is super simple.
yes I like the mirror was it hard to make
That's a great-looking mirror, Jeff. Bet your daughter loves it! Keep up the great work!
KregRep
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community