Comment
woah! that is a lot of hard work! very nice finish, thanks!
Hi Jose. I am certainly no expert and I'm glad to share. I used the Minwax pre-stain wood conditioner, then their Golden Oak to get the color we wanted. I know I only did one coat of the pre-stain conditioner, and I'm fairly certain I only used one coat of the stain to get the color we wanted. I sanded between each coat. Then I just used the MInwax clear gloss polyurethane, I believe I used a total of five coats on all exterior surfaces and three on the inside surfaces, light sanding between each. I probably went overkill on the exterior surfaces and could have stopped at three.
nice job! just one question, what type of finish do you use to make the grain look darker? or maybe you could share the finishing procedure? thanks!
Thanks Jim!
Brett , very nice job and finish, thanks for sharing , well done , JIM!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community