Night stand with drawer - have to put on the door and put the back panel in then stain and clearcoat it. Going with a Sedona Red stain and 3 layers of clearcoat. Let me know what you think of this night stand. Thanks.
Tags:
Comment
Thanks Robert.
A definite example of fine woodworking, looks good even before the finish !!
Steve, what I think, David above has summed it up, "Nice work". When I look at your night stand I see a well executed plan with excellent craftsmanship. I especially like the faceframe- drawer look and the manner it compliments the top. It is eye apealing and looks well balanced even without the door and back panel. The choice of material with a balance of wood knots and the nice top edge detail is a perfect combination. I can see why you get compliments as it is something that you have to take more that a couple looks at it. Well done, I appreciate having the opportunity to see some of your work. Thanks for sharing and Wish you and yours the very best of the Holidays. Keep up the excellent work!!!!!
Thanks. Appreciate the compliment. I've had alot of compliments and even a few requests for it, so I guess I'll be busy making a few more.
nice work
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community