Found this plan in one of my Canadian Home Workshop magazine (pic2) and thought I would try to build it with pallet wood just used one sheet of ply for the carcase.
Thanks for looking and keep on building….
Tags:
Projects: Buffet
Favorite of 6 people
Comment
OK got it, its much the same as the way I make mine, with the refined rebate added
Thank you.
Regards
Robert Brennan
pretty fancy Jim
Jim its me back again,
Beading, I wanted to know how you made the beading
Q1. Full or half bullnose, then,
Q2 Did you make the beading on the edge or side of the timber.
Q3 How did you remove the bead from the stock and how did you maintain accuracy?
Regards
Robert Brennan
Hi Robert,
The back is just T&G pine boards that were left over from our ceiling in our kitchen.
I made a rabbit around the back for them to fit flush.
TTYL
Jim,
I had another look at all the pictures as I was impressed with your work, I think you have pictorially answered my tool question, thanks.
How did yo finish the back there is only a few pictures visible?
BTW have you seen just how many views your pictures have had!
Sorry Frank I don't But I'm sure you can piece together something from the pictures that I posted.
If you email me a list of measurements that you need I will send them back to you. jim@oldkrankys.com
Thanks for liking it enough that you would consider building one for yourself.
Hi Frank, The buffet measures 50" W x 36" H x 19" D
Thanks
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community