Finished this vanity awhile ago, the customer had me make 2 towers that she is going to put mirrors in. I made the trim at the top in 2 pieces, the bottom piece with 17th century architectural bit from Infinity topped with a bullnose.
Tags:
Comment
I couldn't agree more Jay! I can't wait to see what you come up with!
Well Justin is does the job and some of the better looking crown moldings are thoes that are multiple build up of different profiles. The crown that I will be doing for the kitchen cabinet job will be a 12 inch high built up molding. I will be doing some cove cutting on the table saw and adding some dental molding with thumb nail pieces on each side of the dental molding. There will be some more cut profiles in between the large cove cut profile and the dental. It will be custom built so I see what I can dream up.
Thanks Jay, I actually faked that molding. I used a bit from Infinity to make the lower coved portion and then just made a roundover for the top piece. It's a 2 piece molding, but gives the effect of crown without all the tricky cuts!
Excellent looking bath unit Justin. Definately like the beaded face frame and inset doors and drawers. The crown molding atop the two towers really make this stand out. Thanks for sharing your excellent craftsmanship.
Thank you Mr. Dean!
Well done the tower's make's it looks batter as well.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community