I plan on attaching kick plates to the front and back of a TV cabinet I'm building. The sides of the carcase are 3/4" plywood with solid cherry edging and the kick plates are 3/4" cherry. The ends of the kick plates are going to have rabbets that are 3/8" deep and overlap/cover the edge of the plywood. I was planning on using the Micro-Jig and 1" screws but am uncertain as to what height to set the jig at. I fear setting it to 3/4" will result in screws protruding through the face of the kick plate (the pocket screw holes are going in to the inside face of the plywood). So, am I better off using the 5/8" setting or the 1/2" setting? I really don't feel like going through a trial run on scrap wood.
Mitch Wilson
Tags:
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service