I built this rocking chair for my Grandson's 3rd Birthday this month.It is built out of alder with Cherry Seat slats and back slats.The frame of the chair is Lap Jointed and the rest is assembled using the Kreg Jig other than the seat and back slats which I glued and pin nailed. I applied 3 coats of Sanding Sealer and 2 coats of Semi-Gloss Lacquer as the finish sprayed through a HVLP.He was really proud of this as I hope it will be passed on to his Kid.
Comment
literally just joined, and I saw this, very nice. I am looking for plans to build my first rocking chair for my daughter, by any chance can you send me the plans or specs for this chair. it looks gorgeous
email: sjhutson4@me.com
Did you ever do the pattern and measurements?
I am interested in building a rocking chair for my grandson.
If you could email them to john.crocker@sympatico.ca it would be appreciated.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community