For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
Comment Wall (2 comments)
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community
(Re: patio cooler. )Hi, I wasn't using a cut list or a set of plans. Each one of these is built to fit a specific cooler. So even if I had plans they most likely wouldn't fit the cooler you are using. They have to be built to fit. You can get an idea of how I made it using the pics I posted.
Hello Will thanks for your interest. I have made many variations of the shoji style generally using graph paper sketches. The base dimensions are 18" X 17", Top is 16" X 15" The uprights are 24" HT with a span of 8-12" I use Asian printed fabric for the screen, where traditionally Rice paper is used in the genuine articles and inner diffuser material to break up the outline of the light bulb I usually get a Yard each of the material although there is a little material leftover. I usually order the glass for the table top insert based on the inside measurements. Using the Kreg Shelf pin jig I tap 4 holes for the pins to facilitate bulb changing. Truly sorry for not having a layout for you hope this helps, I usually make these as gifts and average about $60.00 in materials. Enjoy!