"Set the tip to the 3/4" setting. By setting it your way, you are drilling too deep hence the reason for the screws going through. Depending on the length and height of the two boards that you are joining, the flexibility will be dependent on…"
"With the K3 you are working all from one side of the jig. By that I mean that the clamp handle and drill bushings are on the same side. With the K4, you are working with the clamp on one side and the drill bushings on the opposite side. If you have…"
What's one interesting fact about you, your life, your garage, shop, or home?
I am a perfectionist. I;ve worked as a Modelmaker / Toolmaker for 30 years in designing and building tooling for production work, or have made many prototypes for lighting for the aircraft industry. Almost every plane has our lights on them.
You need to be a member of Kreg Owners' Community to add comments!