Hello, I have the Kreg Jig K4 Master System. I found it to be very aggravating when I was on a job site or even in my shop using my pocket hole jig and I needed to change the board thickness clamp. Once I was several miles from home and I found I did not have the wrench I needed to loosen the nut on the clamp which cost me a lot of time. That is when I came up with the Idea to put a wrench on the jig so this would never happen again. I happened to have a ½” box wrench that came with something that I purchased that needed some assembly but any ½” box wrench will work. I simply removed the bolt from the Kreg Jig K4, slid the box wrench over the bolt and replaced the bolt back into the jig. I can now do quick and easy clamp changes without ever having to look for a wrench again. I see the new Kreg Jig K5 eliminates this problem with the new ratcheting clamp mechanism but for those of you who have the K4 I hope this tip is useful.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
Comment Wall
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community