Workbench Drawers

I completed a set of drawers that I attached to my workbench. I was able to use pocket holes for most of the joints in this project.

View Slideshow
Get Embed Code

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Daris R. on July 10, 2012 at 12:12pm: If you want to see a more detailed view of how I built the workbench and how I built these drawers you can check out my post over at: www.woodlogger.com

Comment by Daris R. on July 10, 2012 at 12:09pm: The plan that I used actually had a great little upgrade to it that suggested you attach a paper roll to it. I have rubbed wax on small wood projects that I didn't want glue to stick to, but that wouldn't work on a bench. Here is a link to the plan I used for this on amazon.com if you want to check it out: Basic Workbench and 6 Ways to Beef it Up: Downloadable Woodworking ...

Comment by Ron Cryderman on July 10, 2012 at 11:58am: Looks good. I wanted to ask you about your bench. I want to graduate from sawhorses and a 4x8 sheet of OSB. Is there a finish you place on the bench top that would help in cleaning and allow glue drops to be easily removed/scraped?

RSS

Welcome to
Kreg Owners' Community

Sign Up
or Sign In

Or sign in with:

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.

Videos

Miter Saw Workbench

Added by Mike Criss

The Ottoman with Secret

Added by Alex DrMaster

How to Build a Shaker Fireplace Surround - Woodworking

Added by Philip Miller

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…