I built a frame from 2X4s around a couple of flat files centered on a window. There won't be forward access on the left, so I built a top opening chest there. The chest is cedar lined, and the top is edge joined 1X6 pine. On the right there are two forward access openings, a small one for rolled paper, and larger with a sliding shelf. Two forward facing shelves to the ceiling on the left and right, and two interior facing shelves which are solid at the bottom to facilitate leaning against. There is a shelf that spans the width of the room by the ceiling. The shelves are MDF, except for the spanning shelf which is 3/4 ply. I used Kreg joints everywhere except for a lap joint at one place on the face frame, and tongue and groove on another part of the face frame.
Comment
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community