Kreg Owners' Community

Any recommendations on how to attach a K4 or K5 Jig to a Mobile Project Center? What hardware should be used?

Views: 1903

Reply to This

Replies to This Discussion

Glenn, 

The Mobile Project Center has mounting holes in the top allowing you to fasten your jig securely. All you will need are some 10-32 machines screws and nuts to hold it in place. There are nut retainers on the bottom of the table that will enable you to easily tighten your jig in place. If you have any other questions, please let us know.  

Thank you!

Here is how I mount my k3.

Attachments:

seems like it should have been designed to be fastened with at least the kreg clamps. I store my K5 in the storage case.

Why in the world didn't y'all include this information in the manual? Seems odd to me. 

Thanks for the info.

KregCS said:

Glenn, 

The Mobile Project Center has mounting holes in the top allowing you to fasten your jig securely. All you will need are some 10-32 machines screws and nuts to hold it in place. There are nut retainers on the bottom of the table that will enable you to easily tighten your jig in place. If you have any other questions, please let us know.  



Aaron Schrank said:

Why in the world didn't y'all include this information in the manual? Seems odd to me. 

Thanks for the info.

+1

There is no right or wrong way to install.

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

What's On Your Wish List? 1 Reply

Started by KregRep in Community-Specific. Last reply by Brad Martin on Friday.

attaching track saw to Kreg Rip-Cut 1 Reply

Started by A Kain in General Woodworking. Last reply by KregRep Nov 14.

Full size bed 2 Replies

Started by Bigchief in Beginners' Zone. Last reply by justin waldron Nov 11.

Router Table Cabinet 2 Replies

Started by Steve Mitchell in General Woodworking. Last reply by Steve Mitchell Nov 7.

PVC Mouldings 3 Replies

Started by douglas E. Cooper in General Woodworking. Last reply by Don Foley Nov 6.

Product Reviews

Kreg K5 Jig Review

Posted by Daris R. on November 20, 2017 at 5:39pm

The Pocket Hole Joinery Book - Review

Posted by Daris R. on October 17, 2017 at 11:00pm

© 2017   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_