I'm building a garage workshop in the new house. It'll be an effectively dedicated 2 car garage. Here's what I'm planning already, bringing these from the old garage workshop:
* Ductless heater/AC
* Plenty of lights (I have at least 5 4-tube fluorescent banks
* Fold down workbenches attached to the walls
* Fair amount of pegboard to hang the tools
* Rolling wood cart
* Rolling plywood cart (need to build)
I also plan to epoxy the floors and paint the walls... no drywall tape walls here! :)
Any other ideas? Go crazy!
blue tooth speakers for music
Maybe a rolling assembly bench and a centrally located (ceiling mounted) retractable extension cord? If you are sharing with the autos, then take a look at the Paulk Workbench (you can search it in Google). Provides fairly decent workspace, yet you can store it away in a pretty small footprint. I like Steve's Bluetooth speaker ideal also.
Change your tubes to led's only takes about 10 minutes to rewire fixtures and $10 a tube at earthled no shipping or taxies. No more flickers and no more worries about ballast, reduce shadowing and allot more light.
Wow! So does that eliminate buzzing?
I just finished (altho I think it'll always be a work in progress) my budget friendly dream garage (2 cars in there also). Here are some things that I have found really useful!
1. Add as many outlets (quads) as you can!! and be sure they're above your workbench height. My electrician also suggested ceiling outlets to plug my light fixtures into so that they don't take up the wall mounted ones. AND, he switched part of the ceiling outlets so that I can turn on the lights from the door.
2. Another use for the ceiling outlet (separately switched) is for a fan. Helps with paint fumes, bugs, heat.
3. BEST thing I did was figure out a way to install a sink. Plumber was able to tie the drain into plumbing on the other side of the wall.
4. One rolling cart isn't enough. I've built 3. I keep my air compressor and accessories underneath one of them and that been great to roll to my projects, but is still usable as an extra table.
5. An speaking of wheels, everything in my garage is on wheels including rolling drawers under my workbench for more storage. If you're going to have an epoxy floor, you'll love being able to wheel everything out to give the floor a good wash or sweep.
6. I do have one wall with pegboard, but the other 2 walls have slat walls. Looks nice and is stronger.
I could spend all day and night out there!
Jake McKee said:
Wow! So does that eliminate buzzing?
I did switch out all my fluorescent for LEDs - most were just tube replacements. The Feit tubes were a direct replacements for T8 or T12 4 foot tubes. My shop is unheated, and the LEDs are instant on instead of taking 30 minute to come up to full brightness in colder weather. The light seems better, also.
I do like the idea of a sink out there. There are many things for which running water would be handy.
Instead of peg board, run a french cleat system around the perimeter walls. This gives you the option of putting up different items around the wall. I do have a pegboard cabinet with 3 layers of usable pegboard (both sides of the doors and the wall) that hang on the french cleats. Very handy for me.
I never really understood a TV in the shop, I do have a place for my laptop or tablet for viewing plans, or looking up stuff, ordering materials, etc.
Enjoy putting your new shop together!
Having a TV lets me watch mostly news and some of the woodworking shows. I have a three piece speaker attached to my computer so I can listen to music like a youtube mix. My pegboard in my basement allows me to hang more tools in a small amount of wall space. Each panel is 16 inches wide so I have 160 inches of pegboard in about 60 inches of wall. The frames are made from furring strips with pocket holes. The frames are attached to the angle iron with wood dowels.