Kreg Owners' Community

Jay Boutwell's Discussions (889)

Discussions Replied To (874) Replies Latest Activity

"I do it often and never resort to the use to the kreg jig for this application.  I s…"

Jay Boutwell replied Jul 7, 2017 to Pocket holes in beveled edges

4 Jul 7, 2017
Reply by Jay Boutwell

"Depends on the type of hardwood that you wish to use for face frames and door drawer…"

Jay Boutwell replied Jul 7, 2017 to Question about best plywood to use

4 Jul 7, 2017
Reply by Jay Boutwell

"Michael. I use titebond original exclusively through out the construction.  It is a…"

Jay Boutwell replied Jun 10, 2017 to Framed inset drawer/door kitchen cabinets

11 Jul 7, 2017
Reply by Michael Matteson

"Michael,  The less painting that you can do before you start any assembly would give…"

Jay Boutwell replied May 29, 2017 to Framed inset drawer/door kitchen cabinets

11 Jul 7, 2017
Reply by Michael Matteson

"It would depend on how you want to finish the cabinet boxes,  I normally spray all o…"

Jay Boutwell replied May 29, 2017 to Framed inset drawer/door kitchen cabinets

11 Jul 7, 2017
Reply by Michael Matteson

"I believe what you are referring to is the cabinet that is known as an inset door an…"

Jay Boutwell replied May 28, 2017 to Framed inset drawer/door kitchen cabinets

11 Jul 7, 2017
Reply by Michael Matteson

"The easiest and strongest mitered box is one that is held together with glue and a f…"

Jay Boutwell replied Apr 20, 2017 to Looking to build a wood box with mitered joints (Kreg Jig 4)

7 Apr 20, 2017
Reply by Ken Darga

"It normally will and a screw will split more often than a nail.  The reason being is…"

Jay Boutwell replied Apr 19, 2017 to wood splits

4 Apr 19, 2017
Reply by Jay Boutwell

"A person should never use sheet rock or dry wall screws on anything except to attach…"

Jay Boutwell replied Apr 19, 2017 to Kreg 4 jig Newbie - wood splitting problems

3 Apr 20, 2017
Reply by Jeff Fishman

"Hi Doug, You are saying that you are having the sides of the cabinet split when you…"

Jay Boutwell replied Apr 19, 2017 to wood splits

4 Apr 19, 2017
Reply by Jay Boutwell

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Kreg Accu-Cut and Rip-Cut 4 Replies

First off tried to mention all this to Kreg via Email and just because I live outside the USA seems that the system does not work as they say phone number invalid, which is not.OK bought a Accu-Cut and set it up no problems there worked OK both…Continue

Started by Kenneth J Hunt in Other Kreg® Products. Last reply by Kenneth J Hunt on Wednesday.

Router bits 4 Replies

Tungsten carbide? Skill level is beginning woodworker

Started by MINICOOPERUSAF in Beginners' Zone. Last reply by Tim Grace on Monday.

R3 part

hi all can anybody help got r3 for Xmas and I have noticed that the gray tabs are different think somebody  in assembly was talking the piss day and I have 1 metric side and imperial side so they don’t match up hellllp plzericContinue

Started by Eric Kershaw in Beginners' Zone Jan 8.

Having issues with K5 5 Replies

I watched the setup videos, searched for information and spent half a day and can not get the clamp to hold.i tightened up the screws underneath in various stages up to fully tightened, makes no difference.I do not get the two clicks and I can slide…Continue

Started by Todd Caldwell in Beginners' Zone. Last reply by Glen S Jan 7.

Product Reviews

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_