I am going to begin edge gluing Walnut boards to make a bathroom vanity counter top that will be just shy of 9' long. The bathroom sink will be set into the counter.
Here are my questions:
1. Glue; Would you recommend Titebond II or Titebond III or another glue for the glue ups?
2. Finishing; I read this forum on finishing (http://lumberjocks.com/topics/33759); wondering if you have any other insight?
Thanks!
Tags:
Hi Stan, since you are building a big walnut glue up for a bath vanity I would choose titebond polyurethane glue. The reason is it is water proof and holds a tight bond when wet. Another thing I like is that it is available in brown which will hide any glue line that gets exposed in the walnut. since your glue up is 9 feet in length it will take some time to get the planks set within the clamps. It has a longer set up time than the regular glue and cures in about 5 to 6 hrs.
Thanks Jay!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service