Filling pocket holes

[Kim C]

I have a love/hate thing going on with pocket hole plugs.  They are a wonderful solution and give the project a professional look.  I have purchased both the oak and paintable plugs that Kreg sells.  I find they do everything I need them to just fine. 

 

Now the hate side of the relationship... 1. They are expensive to use in places that will not be seen (but pride keeps me wanting those holes filled). and 2. They do not always match the wood perfectly.

I know there are plug cutters out there to be purchased but I would rather focus on new clamps!

 

So I saw a solution on DIY network and it has worked well so far.  I keep a container of "clean" sawdust.  (one for pine and one for oak)  When needed I mix it like putty with wood glue.  Then fill the holes using a spackle knife and take off the excess.  After sanding this looks pretty good... if not in an obvious spot.  I plan on continuing using this method so I am of course trying to perfect it.

 

My question is twofold.  Has anyone else tried this?  -and What would be the best glue to use for this?

[duane ribron]

You use regular doles? Do you pre-cut them to size?

[Eduardo Marquez]

hello.. I tried the sawdust, and it works great. I also saw a video on youtube that shows you how to make the plugs very easy.. here is the link, I hope you find it useful 

https://www.youtube.com/watch?v=aqsAGT0GUNo