...of my new K4MS Kreg Jig Master System - but I think I should have waited :-(
I've never used a pocket hole system before, but was sold on the idea after I built an odd-shaped door for my under-stair cupboard, so decided to buy this for my next project(s).
I bought the K4 because it was in stock and available, but I see the K5 is already out - and with quite a few 'enhancements' over the K4.
My first impression of the kit is a positive one, but I'm not sure the case is particularly useful, because - if it's setup as shown in one or two of Kreg's videos, it should be set up and fixed to a board, leaving only a few items to fit in the case. Screws and inserts would have their own containers, so it's just the drill bits/drivers needing storage. Also, I was a bit disappointed that the clamp seems a bit flimsy made in China!) when everything else is quite sturdy and made in America. There are much better quality clamps out there, so maybe paying for the Master System is a false economy when the standard K4 is almost £35 cheaper.
I'm allowed to send an unwanted product back - if bought online - within 7 days of receipt, so I would appreciate any comments about the K5 so I can make an informed decision.
Basically, should I keep the K4MS, or wait two weeks for the K5 (and pay £5 more), and does the K5 come with the same (or equivalent) items as the K4?
Thanks :-)
Tags:
OK, I am being a numpty!
Just spoke with Kreg in the US and discovered it isn't a printing error and I have to '...trust the settings...'.
So here we go...
Peter N said:
Hi there,
Any thoughts on the picture above, please?
Pete
OK, so there we have it! I've got both the K4 Master System and the K5!
I've even bought a few 'add-ons', including:
...so I think I'd better get on with my projects now!
Pete
Jeff Metcalf said:
Hi Peter;
Glad to hear from you, I was wondering what you decided and was hoping Rita and myself did not scare you off.
We just had different opinions about K4 and K5 ,both of us think Kreg is great and both of us agree on clamps. I have both and think people should buy the K5 then the accessories. And now you have both so please let the members know after you have played with them what one you think is the one people should buy if they are thinking of upgrading.
Looking forward to seeing your projects and pics
Jeff
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service