Kreg Owners' Community

I need some help. I need uy a new table saw. My old one is just a benchtop model delta. I am looking for something either in a hybred or cabinet type. I only have $1000.00 to spend and I am disabled. So ease of setup is a consideration. I have looked at: Grizzly G0715P & G0661, Delta 36-715, Porter Cable PCB270TS, Steel City 35990C & 35990SS, Rigid 4512, Jet 708100 & 708482K. I am lost and need some help in this matter. Any input would be helpful at this point. I am a beginner woodworker, but trying to get better.

                                  Thanx

                                   Mike

Views: 2182

Reply to This

Replies to This Discussion

I like the Ridgid R4512 for two reasons.

1- Warranty, it comes with 3 years warranty.

2 - Price $599.00 but you can bring a 10% discount from Moving coupon that you can get from post office or much better there is 20 %coupon on harbor freight web site for single item taht most of Home deport will honer.

 

Hope this help. 

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_