Starting model can be downloaded from http://sites.google.com/site/racer008racer/kreg/WorkbenchVideo3%2C4.skp
Finished model can be downloaded from http://sites.google.com/site/racer008racer/kreg/WorkbenchVideo5.skp
Tags:
Comment
BTW Tim, my apologies, I didn't pay attention and realize this was your vid! Thanks for that as well!
Hazen
Thanks Tim! I'll give it a shot!
Hazen
You can't export to PDF from the free version (not sure about even the pro version). But what you can do is to export the images of what you want in your PDF.
File / Export / 2D Graphic
You can save as .bmp .jpg .tif .png
You can incorporate these into your favorite PDF software.
If you don't have PDF software, see Open Office
OpenOffice.org 1.1 introduces the one-click PDF export feature that enables you to easily create PDF files without the need for any additional third party software. This feature makes exchanging documents in a standard "read-only" file format a trivial task. The creation of PDF files normally requires relatively expensive third party add-on tools. With OpenOffice.org this feature comes for free.
Tim
James, question re. Sketchup. I have actually completed my first design - shelf/cabinet for either side of our large kitchen window. Pretty detailed actually. Created my own 22" drawer slides, cabinet knobs, crown pieces, etc. Anyway, I wanted to convert it to .pdf. I noticed on your vid above, you have done this. Is this available on the free version? Thanks - Hazen
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community