Hi all,I'm building a large picture frame (about 2' x 3') that will hold a piece of radiator cover to display pins. Using 1x3 flat stock rabbeted down the middle with routered edges and then an inlay…Continue
Started this discussion. Last reply by Michele Feb 3, 2018.
Hi all,I've got a mystery here. Trying to make a bar cart out of 2x6 douglas fir, 42" long. 3 shelves with 4 boards each. We have done this exact same design before in the fall and had no issues. I'm…Continue
Started this discussion. Last reply by Michele Feb 20, 2017.
Hi there,I'm new at this but don't think I did anything wrong here. I did test fit which is where I discovered the problem....I am working on a connect four board based on these plans:…Continue
Started this discussion. Last reply by Ken Darga Jul 5, 2016.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
Comment Wall
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community