Hi all,I'm building a large picture frame (about 2' x 3') that will hold a piece of radiator cover to display pins. Using 1x3 flat stock rabbeted down the middle with routered edges and then an inlay…Continue
Started this discussion. Last reply by Michele Feb 3, 2018.
Hi all,I've got a mystery here. Trying to make a bar cart out of 2x6 douglas fir, 42" long. 3 shelves with 4 boards each. We have done this exact same design before in the fall and had no issues. I'm…Continue
Started this discussion. Last reply by Michele Feb 20, 2017.
Hi there,I'm new at this but don't think I did anything wrong here. I did test fit which is where I discovered the problem....I am working on a connect four board based on these plans:…Continue
Started this discussion. Last reply by Ken Darga Jul 5, 2016.