You can use pocket holes for this application. Unfortunately there is not a standard setup for it. Depending on the thicknesses of both your support piece and that of the apron your settings will change. The best option…"
When working with 1/2" material and the K5 system, you will want to ensure that your drill guide block is set to the 1/2" setting. Then using the setup block, you will want to have the tip of the bit going through the…"
Have You Ever Though About Hooking Up With David Venable On QVC To Sell Your Kreg Jigs? A lot Of People Would Buy Your Items That Do Not Know About Your Jig!! QVC Reaches Out To Millions Of People You Can't, And Don't Reach!!
I wish I would have known before purchasing what I did that the Bench Klamp would not work with the Mini-Trak.I dont think I saw anything in the description stating that. I would have considered buying the larger Trak instead or another accessory in place of the Bench Klamp that would be compatible.
All of my cuts are slightly beveled. I am leaning on saw in one direction to keep it tight because it feels like there is a tiny bit of looseness in the saw sled at the rear. I don't have this problem with the Accu Rip and the same sled. Had to…Continue
Ok, just to let you know. I don't know one end of a bit of wood to the other !I need to build a loft bed for my 14yr old daughter for her new small room.would 30X70mm be large enough to make it out ofThanks for any inputPS anyone got any plansContinue
I picked up the K4MS from Home Depot about 3 months ago, I was looking for a small filing cabinet for under my desk and nothing I looked at would fit or they wanted big money for it, my wife said “why don’t you just build your own then you will…