Kreg Owners' Community

Tony Peters
  • Male
  • Port Hope, Ontario
  • Canada
Share on Facebook
Share

Tony Peters's Friends

  • Ronda McElroy
  • Peter J Herrera
  • Lamont P
  • Jason Allen
  • Kim C
  • Jerry Alfaro
  • KregRep
 

Tony Peters's Page

Latest Activity

Tony Peters commented on Robert Ringel's blog post 'Not Pleased With Pocket Hole Construction'
"As an addition to previous post, the Russian birch has very few voids if any due to the 11 veneer layers.."
Jul 27
Tony Peters commented on Robert Ringel's blog post 'Not Pleased With Pocket Hole Construction'
"Careful of your plywood dimensions.  I only use Russian Birch ply for most of my projects as it is a true 3/4" and my screws don't penetrate..  The plywood manufacturers are getting expert at thin slicing veneers so the new…"
Jul 27
Tony Peters posted photos
Jul 27
Tony Peters posted photos
Jul 26
Tony Peters commented on Tony Peters's photo
Thumbnail

20201015_154101

"Love Kijiji shopping.  Found 8 pcs. of 12' used Plex plastic wood for the sides,  Pressure treated wood, stained, clear coated and raised 1" above the ground.  Used 2 full boxes of Blue Kote Kreg screws."
Oct 18, 2020
Tony Peters commented on Tony Peters's photo
Thumbnail

20201015_154041

"Wainscoting for the side, stained to match the BBQ center and clear coated."
Oct 18, 2020
Tony Peters commented on Tony Peters's photo
Thumbnail

20201015_154112

"Due to the sun lighting,  sections will be filled with some foam insulation for different amounts of soil with tomatoes taking a full depth."
Oct 18, 2020
Tony Peters posted photos
Oct 18, 2020
Tony Peters posted an album
Oct 18, 2020
Tony Peters posted a photo
Oct 18, 2020
Tony Peters replied to Jeff Welsh's discussion 'Wood Frame Does Not Lay Flat'
"If your wood is not perfectly flat, it will do this.  The clamp only secures a small part of the whole wood piece and the rest could be twisted somewhat.  You could try wetting the wood with a sponge and clamping the finished piece down to…"
Mar 24, 2020
Tony Peters posted photos
Mar 24, 2020
Tony Peters commented on Steve Coppin's photo
Thumbnail

Oak Bar

"Nice to see great joinery.  Bet this project took some time to complete."
Jun 13, 2019

Profile Information

Which Kreg products do you own?
Kreg Jig®
How would you describe yourself?
Moderate Woodworker
This was a result of the storage crisis in our home. The need was to reduce clutter and provide easy access to the stored material. It was a one off design I drew up in CAD using the criteria fed to me by my better half. She has good ideas, just doesn't know the storms she brews up. I really think it is the multiple change in direction while the project is under way. Keeps me thinking and adapting. The Kreg Tool earned a place of prominance in my small cluttered shop. I finally knew just what to do with the dowel jig that never seemed to work. I really am impressed. I did learn that Kreg screws each have a place though.
Oh Oh another idea. There will be cloth bolt holders added to the upper cabinet side of the top to store either cloth or Christmas Wrap and use the table for Presents. The top drawer section goes all the way through for storing long bolts of cloth/paper.
The reason the room is so sparce is thatI needed the floor space as a Murphy Bed will be built accross the whole of one wall and will include 3 cabinets. I'll send pictures when completed. I guess I'd better get another box of Kreg screws.......Tony

Tony Peters's Photos

  • Add Photos
  • View All

Comment Wall

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

  • No comments yet!
 
 
 

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone Jul 22.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_