"There is a black "BB" in the clamp that provides the pressure for the clamp and fails by coming apart. Major flaw in my opinion. Probably some cheap synthetic out of China. I'm assuming that the petroleum based lubricant that I used…"
"Yes there is most definitely a trick to using these clamps. Undo the clamping pressure , in other words go into the negative.
They are so tight when they are made you have to "Break them In" adding lubricant will just make a mess. I used…"
Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue
Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom). Shelf holes in the walls are drilled 2" O.C. Like most store-bought…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…