Kreg Owners' Community

So here is the completed fence with it's dust collector for the router table I built. I will post additional pictures of the picture frames I have made for Mother's Day and the quilt hanger I made for my wife.

The reason I made the fence from aluminum is because the wood fence I had built ended up warping on me. It just frustrated me that I spent all that time making a wood fence I thought was going to be the cat's meow. It wasn't... I built this fence for less than $50 and that is including the $20 3" hole saw. I got the aluminum at a local recycle place for $10 and the MDF was from a previous closet organizer project. The Formica for the sliding fences was a scrap piece my dad in his shop from an old kitchen remodel, and the only other cost was for the knobs I purchased for adjustments. Bolts I had, but wouldn't cost more than $5 if one had to purchase them. Now I have the fence I wanted. very accurate. Hope you enjoy the pictures.

I'm headed out Monday to do more wood milling to add to my supply.

jerry-

Rating:
  • Currently 0/5 stars.

Views: 105

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_