Pegboard Shelf
-
Comment by Joseph M. on August 23, 2010 at 12:14pm
-
I did not post the plans as they were technically "purchased" and was worried about copyright infringement or other problems associated with publicly publishing them. I do state on the first photo of each of my projects that I either used plans or designed the item myself.
-
-
Yes the my pegboard and shelves are from those plans.
-
-
I forgot to add, I drilled pilot holes before screwing them in. On the ones on the front I screwed them in far enough to bury the threads. The ones on the back I screwed in to a 1/4" space to fit into the 1/4" pegboard. They are quite strong.
-
-
Thank you for the thumb ups.
I got the hooks from Home Depot. The hooks on the front are #110 L hooks. The ones on the back are a bit larger to fit tighter into the pegboard holes - #108 L hooks.
-
Comment by KregRep on August 12, 2010 at 2:51pm
-
Well done. Great project.
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
