IMG_0030

Comment

Comment by George Yohanek on November 21, 2011 at 2:00pm

Krew really needs to add the detail of these to their catalog of goodies.

Comment by Eddie Bivens Jr on November 21, 2011 at 1:30pm

THanks Criag, they look awasome.. do you have anymore picts you could post up the underneath fo the seat

 

Comment by Craig Helming on November 21, 2011 at 1:06pm

Oh sorry I believe it was around 9" or 10"  They were designed for the store bought seat covers.

Comment by George Yohanek on November 21, 2011 at 1:00pm

Let me ask again, what is the diameter of the seat?

Comment by Craig Helming on November 21, 2011 at 12:20pm

I simply used the kreg system and screws...After the first batch I did I added a top apron for more strength and then screwed through the apron to the seat.  The legs are made from Pine and the seat is Plywood. 

Comment by Eddie Bivens Jr on November 14, 2011 at 7:48pm

How did you attach the seat to the legs?  What kinds of boards did you use for legs and seat?

Comment by George Yohanek on May 26, 2010 at 12:00pm

What is the diameter of the seat? These look neat, my Grand kids would love them.

Comment by Craig Helming on March 14, 2010 at 8:52am

Yes, unfinished. Sometimes that is the best to take the responsibility away from me. They were designed for a baseball training center. Stools are 18" high for a catcher to sit while throwing with a pitcher to save their knees.

Comment by Craig Helming on March 14, 2010 at 12:14am

Biggest Problem: plans are always in my head...something I need to break. Top and bottom of each leg is a compound miter at 5 degrees. The the supports between the legs are just a 5 degree angle to match the taper. The legs are pocket drilled on the two inside sides...watch for where the screw will end up in the seat (don't want them to hit) The seat is routed with a round over bit. I think I have 1.5 hrs and $5 in each and sold for $40 a piece.

Comment by Kim C on March 12, 2010 at 9:49am

Those are really neat. Can you post pics or details on how you designed them? Are the edges finished? It almost looks like you have edge banding on them.