IMG_4643
To get the look...
I used two patio door pulley wheels to glide along the track. the track is a 1 inch by 1/8 inch steel bar from home depot(about 10$) It's held in place with long screws and about 7 washers to get the right distance from the wall.
The bottom of the "t" bracket has a screw with a lock-nut behind it. I used epoxy to cover it with a metal button.
The "shutter" dropstop is made of a wooden drawer pull and covered with a metal button.
Views: 333
Projects: Barn Door Shutters
Favorite of 1 person
Comment
-
Comment by Tila Clarke on February 22, 2014 at 10:54pm
-
The hardware was purchased at home depot but he "buttons" & gear disks from Michael's craft store.
-
Comment by Tim Roman on December 17, 2012 at 5:47pm
-
Great ideas for giving it an upscale look.
-
-
The T and L brackets along with the patio door wheels, and drop stop wooden drawer pulls were from home depot. The covering caps were from a craft store (possibly in scrapbooking section) same with the decorative washers, craftstore like Michael's.
-
-
Were you able to get all the hardware at homedepot/Lowes ???
-
-
Very clever approach.
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community