IMG_2347

Comment

Comment by James Bross on January 20, 2014 at 11:21am

I didn't really make any plans. But I posted all the dimensions on another picture.

Comment by Paul R. Fortier on January 19, 2014 at 10:11pm

Where can I find the plans for this if you don't mind me asking???

Comment by Janet Hassani on July 1, 2012 at 9:58pm

Forgot one other comment. I love the wheels idea. I like wheels on just about anything that has volume or weight . You can move the item where ever you need them.

Comment by Janet Hassani on July 1, 2012 at 9:56pm

Nice work table. The drawer is a very handy addition. Things are there and not in the way when you are not using them.

Comment by James Bross on February 1, 2012 at 4:52am

Yea that is a good idea. I have some left over I could use that. Thanks for the idea.

Comment by Evan Siefke on January 31, 2012 at 11:28pm

Nice clean functional table James. I have a similar arrangement for my mobile work bench. I used a square piece of the melamine I used on the top to drop into the corner. Pull it up when you want to insert or remove a clamp and it looks really clean. Just a suggestion. Well done.

Comment by James Bross on January 31, 2012 at 4:11am

The clamps use the track in the middle. The two slots on the sides are for the bolts to attach to the table. This square area is where you can slide the clamps into and out of the tracks. And yea a round over is a pretty good idea.

Comment by Rick on January 30, 2012 at 5:28pm

When you get that last piece of track, cut that temporary section of top and glue it in the corner.

Why do those tracks have slots on top and bottom?  Do you use the ones on the bottom?

Methinks a roundover bit will soften the edges of that worktop.  ;-)