IMG_0701

Comment

Comment by Robert Brennan on November 7, 2015 at 4:11pm

Marco,

Nice work on the chairs.

I have never seen that type of saw before, however after taking another look at the picture of your saw, under the table on the left is a green knob.

Its a green tee shaped knob, opposite the start button.

This is where you adjust the table saw depth.

From what I found on the net it looks like you have a Evolution Fury 6 saw.

Comment by michael evans on August 2, 2015 at 4:20am

Thanks for the reply Marco , maybe your saw needs some adjustments .Their should be adjustment screws on the machine to set it for a accurate cut. I see yours is a combo saw mitre and table saw in one ,I was looking at just their mitre saw . Thanks for the friends request would be a honour ,if I can help with anything let me know Mick!!

Comment by marco monteiro de melo on August 1, 2015 at 11:35am

Hi there Michael, 

I am new on this site and don't how to replay to messages. I hope you can get this one.

Regarding the combo Table and Mitre saw, it is ok for an ameteur as it has it's limitations. For example, you cannot regulate the cut on the table saw which would be about 50mm high maximum and the mitre saw does not cut straight at the first time. I always make 2 cuts to get a 90 degrees. Maybe I still have a lot to learn but, if you have professional staff to do, maybe spend a bit more and get DeWalt or a Bosh. If not you can always make a trial and if you are not happy just take it back. I hope that helps.

Comment by michael evans on July 31, 2015 at 9:08am

Hi Marco , can I ask how accurate are those evolution saws ? Thinking of getting one for where I work .