Tags:
Projects: Project 5_Children chairs
Location: Scunhorpe, UK
Comment
Marco,
Nice work on the chairs.
I have never seen that type of saw before, however after taking another look at the picture of your saw, under the table on the left is a green knob.
Its a green tee shaped knob, opposite the start button.
This is where you adjust the table saw depth.
From what I found on the net it looks like you have a Evolution Fury 6 saw.
Thanks for the reply Marco , maybe your saw needs some adjustments .Their should be adjustment screws on the machine to set it for a accurate cut. I see yours is a combo saw mitre and table saw in one ,I was looking at just their mitre saw . Thanks for the friends request would be a honour ,if I can help with anything let me know Mick!!
Hi there Michael,
I am new on this site and don't how to replay to messages. I hope you can get this one.
Regarding the combo Table and Mitre saw, it is ok for an ameteur as it has it's limitations. For example, you cannot regulate the cut on the table saw which would be about 50mm high maximum and the mitre saw does not cut straight at the first time. I always make 2 cuts to get a 90 degrees. Maybe I still have a lot to learn but, if you have professional staff to do, maybe spend a bit more and get DeWalt or a Bosh. If not you can always make a trial and if you are not happy just take it back. I hope that helps.
Hi Marco , can I ask how accurate are those evolution saws ? Thinking of getting one for where I work .
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community