Comment
Rita,
I practiced on some scrap and chose to assemble the top first then use painters tape. I taped off the edges first and did the red/Spanish oak first, then taped off the red and did ebony stain on the edges. I then assembled the top to the base and put the poly on. I sat it upside down on a towel (to protect the top) and applied the poly to the base and the underside of the top first, then flipped it over and did the top surface. I also laid strips of tape on the underside of the top where the base meets so as to have bare wood for better glue adhesion. I also had to sand the little extra stain that got on the base mating piece before assembly.
Don, it turned out great! You have done well by just a piece of inspiration! Did you finish prior to the assembly or use tape? I seem to recall a post about that.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community