I "apprenticed" with my father, Neil, in making this changing table for my first grandchild, Mason Neil. The hardwood is tulip, from a tree taken down from the family home ~22 years ago - about the last of the remaining stock!
Tags:
Projects: Changing table for Mason Neil
Comment
Joan, what a stunning piece of furniture you and your Father have created. Making a item of this class is especially nice since it is made from lumber from a family home of many years ago. When you look at it, it seems to compell you to want to touch it. The finish is like a velvet shine and the lines of the design make it a special piece that will be become the pride of thoes whom posses its grace and the envy of those whom only get to admire it. I can imagine members of your family seeing it and recalling certain memories of that tree. When it fell they never quite realized that it would give life to a beautiful piece of furntiture that will be the joy of many whom have its ownership it in years to come. You and your Father have truly given that special tree a new life. Thank you for sharing this work.
Very nice Joan, you and your father have done an outstanding job. well done and thank you for taking the time to share your work with us.
PS - he stored the dried lumber in his basement :)
Hi Robert - thanks for the compliments! It was a labor of love through the generations! I do not have photos of the original stock. When the tree was felled, Dad built a drying shed for the lumber. (He also took down a fir, cedar and hemlock.) The top, shelves and sides are 1/2 and 3/4 birch plywood with tulip trim. It was fun making the drawer fronts, as well as choosing piece for the "backsplash" which was selected to mimic the rolling hills we have in this area. I used 3 coats of natural Danish oil (2nd and 3rd coats with 400 grit wet/dry sandpaper), followed by 3 coats of Trewax Clear Paste Wax (wax on/wax off).
Thanks again - from both of us!
Joan
Joan,
A most impressive result you have achieved.
Now as always a few questions.
1 Have you got any photos from the original tree stock?
1a How did you store the timber for 22 years?
2. Is the top a full length single piece of timber?
2a Exceptionally good example of book matching on the drawer fronts
3. What finish did you use to produce the great finish?
Make sure you let Neil know the work has been is well received globaly too, even if only in the 2D form!!
Robert Brennan
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community