Kreg Owners' Community

almost finished- just have to apply a coat of danish oil

Rating:
  • Currently 0/5 stars.

Views: 214

Projects: dining2

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by mo khan on April 22, 2011 at 7:05am
As far a I know Danish oil is just tung oil with some polymerizing agents. It's easy to apply and hardens on drying forming a low sheen durable finish. I applied 1 coat of dark stain and 6 coats of danish oil on the top, sanding with a 400 grit between the coats of danish oil.
Comment by mo khan on April 22, 2011 at 7:01am
Yeah Skipper- I jut used a chamfering bit in the router. I used the same bit to groove the bench boards.
Comment by Skipper Smith on April 22, 2011 at 6:49am

  Hey MO.  I have another question.  That danish oil you mentioned, is that some kind

of preservative?  And did you put any other kind of stain on it, along with the danish oil?

 

 Well, that's two questions! (LOL)

Comment by Skipper Smith on April 22, 2011 at 6:46am

 Thanks for posting the measurements, MO.  I am used to inches; so I used a

conversion table to get the inches.  I would like to build a table like that for the

back patio!  And it looks as though you did a bit of router work on the tabletop.

 

Is that correct?

Comment by mo khan on April 22, 2011 at 12:32am

Hi Jerry,

The table legs are 70 mm square and the bench legs are 40mm square. All joints including the top are 'kregged'.

Comment by Jerry Alfaro on April 21, 2011 at 11:22pm

Are the legs about 80mm square?

Like the table.  I have some 2-1/4" or 57mm thick Douglas Fir slabs that I'm thinking of making some tables from.  This design would be easy to build.

 

jerry-

Comment by mo khan on April 21, 2011 at 10:17pm

Thanks Skipper- the wood is pine and the dimensions are as follows:

table- height 900 mm, length 1500mm, width 980mm

bench- height 500mm, length 1200 mm, width 360mm

Comment by Skipper Smith on April 21, 2011 at 1:40pm
Fine looking piece of work.  May I ask, what type wood did you use; & what are the dimensions?
Comment by KregRep on April 19, 2011 at 9:19am
Beautiful work...

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Keg Easy-Step Collar and XL 1 Reply

Does Keg Easy-Step Collar work with Kreg XL?

Started by Nick in Beginners' Zone. Last reply by Ken Darga on Monday.

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

Product Reviews

The Pocket Hole Joinery Book - Review

Posted by Daris R. on August 27, 2024 at 8:29pm

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_