Bath_Room_Shelf_002
This was my first major project. We just remodeled the bathroom and had this window in this spot. The wife wanted some shelves but didn't want to loose any space. So i removed the window and installed this shelf.
Views: 638
Projects: First major project
Location: Home
Comment
-
Comment by Steven R. Hulse on February 12, 2012 at 3:23pm
-
Hey Buela, first of all let me apologize for not getting back to you sooner. I've been pretty focused on my real job over this past year as a lot has been going on to keep me busy.
To answer your question, I did it the hard way. I measured out each hole about 1" apart and drilled the holes with the help of one of those rubber spacer things. (I'm very technically versed when it comes to certain woodworking tools yet. LOL) Not to long after I completed this, an article came out in one of the wood working magazines telling how to do this an easier way. There are templates available but you can use perforated board as your template. Then just use those little shelf pegs you can get at most home improvement stores.
-
Comment by KregRep on December 20, 2011 at 10:27am
-
Very nicely done!
-
Comment by Buela Martinez on December 20, 2011 at 9:47am
-
That's a lot like the project I'm planning to try as my first major project. How did you handle the adjustable shelves?
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community