Ready for paint.

Comment

Comment by Andy P on December 31, 2011 at 11:26pm

Thanks Jim, I went looking for an edge bead router bit today. On the long car-ride home I decided to sort out the counter top material and attachment method before I get to much further along. Thanks again for sharing your builds.  

 

Comment by Ken Darga on December 30, 2011 at 5:53pm

Jim,

Nice looking project.

Painted finish?

Looks good enough to have a ''stained'' finish.

Comment by Jim Delorme on December 30, 2011 at 9:02am

Hi Andy, I used pocket hole screws from the underside to attache the lower shelf. they hold very well and there isn't really that much weight to support anyhow (a few towels and basket with misc stuff).

Comment by David Dean on December 30, 2011 at 12:56am

nice job i never thought of useing 1/2 for the ends but i have to keep cost down.

Comment by Andy P on December 29, 2011 at 10:40pm

Hi Jim, very nicely done and inspiring. I've looked at the pictures and I think read all your comments but I am stumped on how you attached the lower shelf. Is it simply screwed into the legs from the underside? Thanks for sharing your work.

Andy