Kreg Owners' Community


You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Tom on June 21, 2015 at 9:38am

Thank you Damian. I don't have any drawings on it. it was pretty simple.  I used 1/2" oak plywood to build the basic box.  Then I used 1.5" oak boards to make the face frame on the front and sides.  The top piece is an oak board and i used a router with a circle jig i made to cut the holes for the bowls to slide into.  put a piano hinge on it and a little chain to stop the top from opening all the way.  i then put 3 coats of polyurethane 

Comment by Damian Simpson on June 19, 2015 at 8:45am

Hi Tom, great idea you have there for the dogfood. Was wondering if you had any plans or specs that I could use to create my own? Any help would be great.

Comment by Anthony DeCesare on April 29, 2015 at 8:27am

nice clean design and practical - great job

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone Jul 22.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service