Mobile Work Station

Comment

Comment by Larry Crouse on March 9, 2012 at 10:53am

Love...not lifetime.......phone error

Comment by Larry Crouse on March 9, 2012 at 10:53am

Thanks partner.....I was mainly joking but yeah.......I'd Lifetime build this!!!

Comment by Evan Siefke on March 9, 2012 at 10:50am

Thanks Larry. I will see if I can scan it. I made some adjustments while cutting it so I am not sure how accurate it is.

Comment by Larry Crouse on March 8, 2012 at 9:05pm

I cant even imagine what a cut list would look like for this.  ITS A BEAST!!!!!!!  Good JOB!!

 

(btw.......can I get the cut list........)

Comment by Evan Siefke on December 6, 2011 at 5:18pm

I used four coats of oil based lacquer. The first gallon I bought was Valspar. I ran out so I used a gallon of Dunn Edwards lacquer because the store was closer. It is satin 20 sheen. My brother sprayed it with a combo airless/HVLP milwaukee sprayers. It worked awesome, especially for the $$.

Comment by Michael D. Scully on December 6, 2011 at 3:10pm

What sort of finish did you use? It looks fantastic.

Comment by Evan Siefke on December 5, 2011 at 12:52pm

It was kind of an after-thought to honest. I posted pics of the conceptual drawings I did. The drawings vary slightly from the finished project but overall it is the same. The cabinet will be wired internally and a heavy extension cord will run over to an outlet. The router, compressor, and the charging station will be powered when in use. I still need to weld up a metal frame with casters to make it mobile. Thanks for the kind words guys, I wasn't sure how my first cabinet was going to turn out but I am pretty pleased. I learned a lot.

Comment by KgPhoto on December 5, 2011 at 12:14pm

Great idea about that battery charging station.  I have designed three different ones and none have been what I need. The idea of now having a pull out shelf in a cabinet is the next version and it seems you have beat me to it.

Comment by Evan Siefke on December 5, 2011 at 11:46am

Thanks guys. I appreciate the feedback. I will post my drawings, its not done on SketchUp or anything but it will give you somewhat of an idea. I'll post a couple new pics. I recently built a battery charging station into a drawer above the air compressor.

Comment by Ron T on December 5, 2011 at 11:37am

Nicely done sir!!  Any thoughts on putting together a set of plans?  This looks like what I need to put into my fledgling shop.

• ‹ Previous
• 1
• 2
• Next ›
• Page