Mobile Table Saw Unit

Built with leftover scraps and Kreg pockethole joinery. No plans available, but is about 5 1/2 ft. long and 32 inches wide. Work surfaces are 3/4 inch plywood. Saw is secured with 4, 2 inch, 1/2 inch carriage bolts with wing nuts for easy removal. The black drawer (1/2 inch plywood) below saw catches the majority of sawdust for easy removal. 3 1/2 inch locking wheels give good mobility and stability. Structural elements are all 2x4s. Top surface is 37 inches high to interface with existing workbench (see prior post) as an out-feed surface for long boards, or for handling 4x8 foot sheet goods.