Kreg Owners' Community

Mobile Phone Charging Station and Organizer

Mobile Phone Charging Station and Organizer

I was looking for a desk organizer with a drawer to convert into a charging station for all the mobile devices that are accumulating in my home. A drawer was necessary to use the space behind the drawer for all the cables. I couldn't find anything I could modify so I decided to build my own.

I glued and screwed together 6" boards to one another using 1 1/4" Kreg Pocket Hole Screws to make 4 panels. I then customized the depth of the unit for what I needed. I used 1x3 boards for the drawer and back splash. The drawer was assembled with pocket hole screws, though I cut a rabbet instead of a dado to maximize the depth for the drawer bottom. I used some Polyethylene Film Tape on the drawer bottom and it slides like butter. The drawer depth leaves about 4" in back for the outlet strip, adapters and wires to be concealed. I decided to use a traditional dark walnut stain on the drawer front to provide some contrast. I also selected some oak boards with unique grain that I wanted to highlight. I used an old voltmeter knob for the drawer pull.

Assembly after finishing was also with pocket hole screws. The finished product conceals a large outlet strip, cables and USB and USB-C for all the chargers. The white chargers are standard speed. The black are fast chargers. The wireless chargers are also fast chargers.

  • photo
  • photo
  • photo
  • photo
  • photo


You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 


  • Add Videos
  • View All


Pocket Hole Drawer Slide Brackets?

Hello - I have a couple of workbenches in my 'shop' and am contemplating putting 2 or 3 pull out bins on the bottom shelves of both. I've not worked with drawer slides before and am looking to make it simple(r). Thinking of making 2 sets of pocket…Continue

Tags: hole, pocket, basket, slide, Drawer

Started by E M Hampton in General Woodworking Jan 10.

Kreg Jig 5 Clamp Busted 1 Reply

My clamp to hold boards to my kreg jig no longer works.  It won't move from it's spot and when I push the grey button on top, nothing happens.  are there replacement parts for this?Continue

Started by Tammy in Beginners' Zone. Last reply by John Browne Jan 3.

Product Reviews

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 2 Comments

Kreg Jig Dust Collection Attachment

1st impression when you hold this attachment in your hand:  "not much to it", Kreg sure is makin' $$ here.

Then I installed it.. perfect fit, leaves just enough room to adjust the setting screw on my K4.

Then the real test, hook…


Posted by Grampy Meyer on February 23, 2020 at 11:36am — 2 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service