Living Room Shelves
These shelves were added to each side of the fire place, and I recreated the mantle detail on the shelves. It was built using the Kreg Jr. and the K3. The Glue that was used was Titebond, the wood filler was Timber Mate - White and the Finish Coats were Sherwin-Williams Sher-Wood Cab-Acrylic Lacquer and Primer.
Comment
-
Comment by Robert Goss on December 12, 2010 at 10:06am
-
Thank you very much. My first experience with Lacquer was a little nerve racking, but now it's my preferred finish if the project is to be painted. Sherwin-Williams can custom match any color in the pastel family.
-
Comment by KregRep on December 11, 2010 at 7:59am
-
Absolutely stunning project.
-
Comment by Steven R. Hulse on December 9, 2010 at 8:53am
-
Very nice.
-
-
Thank you, I just sprayed the primer tonight and plan to spray the lacquer tomorrow and Friday and install on Saturday, whew, got my work cut out for me. Oh yea and I have a full time job.. O_o
-
Comment by Al Barale on December 1, 2010 at 2:16pm
-
Excellent work Robert, I'm sure that your client is going to be very happy.
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community