Me skating at the Carson Runway by the GoodYear Blimp!
Comment
Hi James. It may not have been this one, but when you see one this close, it is very surreal! Many, many years ago, a friend of mine unusually caught the GoodYear blimp behind me (skating) at the old Carson Runway skateboard park in Carson, CA (southern CA). It is amazing what you can do with a straight piece of wood and a table saw, a mitre saw, the kreg jig, and flat black paint! I'm glad that you liked it! Thank you!
Zac
Zac
Hi Claude, thanks for the kind words! I've had this picture for many, many years, and I thought that it was just about time I framed it! I wanted something interesting, so I used the kreg jig to create a special frame. A friend of mine unusually caught the GoodYear blimp behind me (skating) at the old Carson Runway skateboard park in Carson, CA (southern CA). I'm glad you found it interesting!
Zac
Cool! Like the design and the finish, very subtle, doesn't distract the beauty of the photo. Great job!
THE Goodyear Blimp? I saw it one year in Savannah, GA.
Very nice job on the frame.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community