Thank you for the kind words regarding my finished box! If there is anything that I can help you with, please ask! I've been to N.C. only once, and that was to install an HR computer system at Henredon furniture corporation. I would…"
Hi Zac , been busy also family life has taken over all of January .I did make a planter for the wife ,and I am currently making a bi fold door for a friend . Loved your drawers you made a quality piece my friend .Mick.
The Kreg Concealed Hinge Jig has a setting for the distance from edge of the door to the nearest edge of the 35 mm cup hole. This can be set as 3, 4, 5, or 6 mm.Later in the instruction there is a table that converts the distance from the edge of…Continue
I have an old Rip-Cut which I bought many years ago but did not set. I seem to have lost the instructions, if I ever had them.I cannot figure out which bolts are match with the nylon-lock screws.This unit is old enough that the current instructions…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…