House Features:
• 3 Floors, 5 Bedrooms
• Textured Roof
• Window Shutters
• Stained Wood Floors
• Window and Door Casing
• Floor Baseboards
• Door leads to Walk-out Deck above Garage
• LED Room Lighting
• Dimensions: 6'4.5" Height, 4'2.5" Wide, 2'2.75" Deep
Garage Features:
• Large Wood Deck with Railing
• Ramp into Garage
• Open Garage Walls for access on multiple sides
• Led Lighting
• Exterior Floor paint designed to hold up and fit the American Girl Doll Jeep
• Dimensions: 2'11" Height, 1'9.5" Wide, 3'10" Deep
Comment
Hey Mario,
Thanks for the reply/explanation & extra picture. Very cool to see your process for making the fence, but definitely looks a little beyond my skills at the moment. I hope your daughter (or whomever this was for) has many years of fun with this thing!
Hi Joe,
The fence was a bit tricky to make. I wanted to make sure it was beefy enough for kids to lean on and even grab onto and pull on it without breaking. I'm pleased to say that it is rock solid. It was extremely time consuming. I built them in sections by glueing and nailing. I routed/notched slots in a 3/4" x 1.5" board at the bottom of the railing that secures the 3/4" posts and 1/2" balusters together against the exterior of the garage.
I bought the lights through Amazon:
https://www.amazon.com/gp/product/B00KY4W2GM/ref=oh_aui_search_asin...
Hey Mario, I love your garage addon to this dollhouse. I'm working on building the same one for my daughter and am taking inspiration from your modifications. If you wouldn't mind sharing, I have a couple questions for you:
1. Did you make the fence or buy it somewhere? If you made it, how did you make the grooves in the fence posts? Very nice detail!
2. Where did you get the LED lights?
Thanks!
One thing for smaller children you could consider is designing it so it is rotated 90 degrees so the long side is on the floor. A 3 yr old will not be able to reach the top floor.
Thanks Homer!
All I can say is - WOW.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community