Sort by: View
Discussions | Replies | Latest Activity |
---|---|---|
Polyurethane helpSo I had this conference table to refinish and by the second picture you can see how the poly has "puddled".. Here is what I did and any h… Started by justin waldron in Beginners' Zone |
12 |
May 13, 2011 Reply by justin waldron |
Can the Kreg system be used with Plastic?I have a project in mind for my boat using the type of plastic that cutting boards are made from only this is 3/4" thick. Will the Kreg sy… Started by Robert Redman in Kreg Jig® Operation |
18 |
May 10, 2011 Reply by Marc St. Pierre |
word trainWOOD Started by mo khan in Miscellaneous |
18 |
May 9, 2011 Reply by ray vile |
Which Setting on Drill Guide for different material thicknesses?I am attaching a 3/4 inch piece to a 1-1/2 inch piece (2x4). Which Piece do I use to determine my Drill Guide setting , the 3/4 inch or th… Started by D S in Kreg Jig® Operation |
9 |
May 9, 2011 Reply by Skipper Smith |
Wood Screen Doors - Pocket Holes to Prevent Sagging?I posted a couple of photos of a wood screen door that we recently purchased to replace one that has seen much better days. We're thinking… Started by Susan in Beginners' Zone |
6 |
May 7, 2011 Reply by Jens Jensen |
Screw LengthI had some scrap laying around and I wanted to create a cross cut jig for my table saw. I had some 2x4's and 1/2" plywood lying around. I… Started by Jameson in Beginners' Zone |
3 |
May 7, 2011 Reply by Jameson |
Square-Cut jigI just bought a Square-Cut jig and found that the smallest the adjustable arm would adjust to was about an inch which is to long for my Rob… Started by Larry L. in Other Kreg® Products |
4 |
May 7, 2011 Reply by Scotty Gadlin |
organizeri am interested in building a closet organizer, for 4 closets in a apartment i am moving to. Started by Gerald Jefferson in Kreg Jig® Projects |
5 |
May 7, 2011 Reply by Michael Moldenhauer |
Off Set Router baseIs anyone using a Offset router base on a Laminate trim router to shave down the wooden plugs once they have been glued in. If so which T… Started by David Cooksey in Kreg Jig® Projects |
1 |
May 6, 2011 Reply by kenny from Sundre |
Wood benchTrying to find the plans or dimension of the wooden stool they show in the Kreg video Started by Joe Rinaldo in Beginners' Zone |
0 | May 6, 2011 |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service