Tags:
The Kreg PRS3000 Router Lift. This is not only on my "WISH LIST' it is on my "GET LIST"
kenny in Sundre
Ridgid 13" planer and a jointer of some kind...
I agree with you Mike, that planer is in my sights... Just waiting for a sale on that puppy!!
Mike McGuire said:Ridgid 13" planer and a jointer of some kind...
I am also hoping for a planer. I'll keep reading these posts in hopes that someone will find a sale going on and let the rest of us know. Jim
There are wish lists and then there are dream lists, my dream list would include
Sawstop 3hp cabinet saw with 52'' rails, cast iron extension wings and a mobile base,
Jet 18'' drillpress,
Jet 14'' bandsaw,
Jet 8'' Jointer/planer,
Floor standing sander with a six inch belt (very handy for lapping hand planes flat)
Finally a ten inch radial arm saw with 24'' plus crosscut capacity.
Aaron Brown said:
Powermatic; 6" jointer, 18" drillpress, 14" bandsaw, 1.75hp dustcollector, air filtration system, hollow chisel mortiser. Oh and a 1.75HP 10" Professional Cabinet Saw, should round out my wish list.
Well I got mein a friend had a 30 x 80 shed and I got all the 2x6s and 2x4s so I'll be adding a 12x15 room to my old wood shop when it get's warm.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service