Tags:
I have two compressors, one 10 litre which is for trim and a 50 litre for framing. I have two brad guns, a Senco and a Milwalkee. The Senco leaks and i hate the nose on the Milwalkee. I have a Senco 15ga finish gun, a Porter-cable palm nailer and a Makita coiled framing gun.
How do you like your Porter-cable palm nailer? I was considering one for my upcoming deck project.
thetoolnut said:I have two compressors, one 10 litre which is for trim and a 50 litre for framing. I have two brad guns, a Senco and a Milwalkee. The Senco leaks and i hate the nose on the Milwalkee. I have a Senco 15ga finish gun, a Porter-cable palm nailer and a Makita coiled framing gun.
Wow that's a great deal on a palm nailer. I'll have to visit my local store next week.
Hal Schmidt said:
I have a Husky 60 gallon that is in my utility room attached to my shop and it is plumbed with 2 outlets in the garage and 4 in the shop. I also own a Black Max which I have in my other garage and I have had it for over 20 years. I like the Black Max. The Husky burnt itself out some how when I was in the hospital and it took 2 months to get a replacement. The Husky sold by Home Depot says on the tag "5 year warranty" I found out that this was only for the tank. The compressor had only a one year warranty, very misleading. I have a framing nailer and 2 brad nailers and 2 palm hand nailers. My favorite is the compact hand air nailer sold by Harbor Freight for only $13.99 see http://www.harborfreight.com/compact-air-hand-nailer-99555.html. I will drive a nail in 1-2 seconds and weighs about 1 pound
I have the same kit. Works great, and saves a ton of time....i had entertained the idea of getting a larger compressor so that I could run a framing nailer. But the cost difference of the compressor plus the price of the framing nailer put me around the same price as one of the Paslode gas powered cordless units.
I'd recomend this set up to any hobbyist.
For a framing nailer, the Bostitch F21PL is great! The main selling point for me was that you could shoot both framing and metal connector nails with one tool. The swap over between the two is a matter of seconds. This gun has never jammed or otherwise let me down. As far as a brad nailer the Bostitch N62FSK has also served me well with no issues - best part is I bought it used at a yard sell for $20! I use a Craftsmen 3 gallon/ 1hp compressor on both of these guns and it works well - just use care around the plastic breather.
For a framing nailer, the Bostitch F21PL is great! The main selling point for me was that you could shoot both framing and metal connector nails with one tool. The swap over between the two is a matter of seconds. This gun has never jammed or otherwise let me down. As far as a brad nailer the Bostitch N62FSK has also served me well with no issues - best part is I bought it used at a yard sell for $20! I use a Craftsmen 3 gallon/ 1hp compressor on both of these guns and it works well - just use care around the plastic breather.
Thanks John and Daniel. I was told that the compressor didn't have the jam to sink the nail...but i'll take real experience over the hardware store propaganda anyday.
Thanks Gents
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service